Focus ZTS L4-2.0L DOHC VIN 3 (2001)
2. Detach the B-pillar upper trim panel.
1. Detach the retaining clips.
2. Remove the lower anchor bolt and spacer from the safety belt webbing (4-door and Wagon shown).
3. Feed the safety belt webbing through the B-pillar upper trim panel.
NOTE: Certain production trim panels have a retaining clip on the front edge.
3. Detach the upper safety belt anchor.
4. Remove the lower trim panel.
1. Remove the lower screw.
2. Remove the upper screw.
3. Detach the front clips.
4. Detach the upper clips.
NOTE: The screws are located behind the backrest and beneath the seat cushion.
