Focus ZTS L4-2.0L DOHC VIN 3 (2001)
2. Detach the safety belt lower anchor.
1. Remove the bolt from the anchor rail.
2. Slide the safety belt off the anchor rail.
3. Detach the B-pillar upper trim panel.
1. Detach the retaining clips.
2. Remove the safety belt lower anchor bolt and spacer from the safety belt webbing (4-door and wagon shown).
3. Feed the safety belt webbing through the B-pillar upper trim panel.
NOTE: Certain production trim panels have a retaining clip on the front edge.
4. Detach the safety belt upper anchor.
5. Remove the lower trim panel.
1. Remove the lower screw.
