Focus ZTS L4-2.0L DOHC VIN 3 (2001)
Remove the locking pin.
7. WARNING: Make sure the air bag sliding contact is centralized before installing. Failure to follow this instruction may result in personal
injury.
Centralize the air bag sliding contact.
1
Turn the air bag contact in a COUNTERCLOCKWISE direction until a resistance is felt (approximately 2.5 turns from the central position).
2
Turn the air bag sliding contact CLOCKWISE 2.5 turns until the arrow marked on the center of the sliding contact aligns with the raised "V"
section at the 12 o'clock position on the outer cover of the sliding contact. The sliding contact is now centralized.
8. CAUTION: Make sure the spacing collar is correctly located. Do not assemble if the spacing collar is missing.
Install the air bag sliding contact.
^
Make sure both the retaining tangs lock into position on the steering column.
9. Install the steering wheel.
