Focus ZTS L4-2.0L DOHC VIN 3 (2001)
9. Remove the PSP switch.
Installation
1. NOTE: If installing a new power steering pump, the unions that are supplied fitted to the pump should be removed and retained for future use.
Using the special tool, install a new O-ring seal onto the steering gear to power steering pump union.
1. Push the new O-ring seal onto the special tool.
2. Locate the special tool onto the union and install the O-ring seal.
2. Install the PSP switch.
3. Install the power steering pump.
4. Connect the power steering hose to the power steering pump.