Focus ZTS L4-2.0L DOHC VIN 3 (2001)
Tie Rod End: Service and Repair
Special Tools
Special Tools
Removal
1. Loosen the front wheel nuts.
2. Raise and support the vehicle.
3. Remove the wheel.
4. Loosen the tie-rod end locknut and remove the retaining nut.
1. Loosen the locknut.
2. Remove the retaining nut.
5. Using the special tool, release the tie-rod end from the wheel knuckle.
6. NOTE: Make a note of the number of turns used to remove the tie-rod end.
Remove the tie-rod end and locknut.
Installation
