Focus ZTS L4-2.0L DOHC VIN 3 (2001)
Control Arm: Service and Repair
Rear Suspension
Lower Arm - Front
Removal
1. Set the suspension to the design height.
2. Remove the front lower arm.
1. Remove the bolts.
2. Remove the front lower arm.
Installation
1. CAUTION: The front lower arm is marked FRONT. Make a note of the orientation of the front lower arm for installation purposes.
To install, reverse the removal procedure.
2. Lower the suspension from the design height.
3. Install the spring.
Lower Arm - Rear
Removal
1. Loosen the wheel nuts.
2. Raise and support the vehicle.
3. Remove the stabilizer bar link from the lower arm.
4. Set the suspension to design height.
5. Remove the rear wheel.
