Focus ZTS L4-2.0L DOHC VIN 3 (2001)
2. Install the crossmember retaining bolts (three bolts each side).
3-door and 4-door
3. Install the evaporative emission canister.
All Vehicles
4. Install the exhaust system.
5. NOTE: Do not lower the suspension from the design height.
Install the upper arms. For additional information, refer to Upper Arm.
6. NOTE: Do not lower the suspension from the design height.
Install the front lower arms. For additional information, refer to Front Lower Arm.
7. NOTE: Do not lower the suspension from the design height.
Install the rear lower arms. For additional information, refer to Rear Lower Arm.
8. Install the stabilizer bar. For additional information, refer to Stabilizer Bar.
9. Check the rear wheel alignment.
