Focus ZTS L4-2.0L DOHC VIN 3 (2001)
Radius Arm: Service and Repair
Removal
1. Loosen the wheel nuts.
2. Raise and support the vehicle.
3. Remove the wheel.
4. Detach the parking brake cable.
1. Detach the sleeve.
2. Detach the parking brake cable.
5. Detach the cable guide.
6. Pull the cable and guide through the tie-bar.
7. CAUTION: Cap the brake hose competition, to prevent fluid loss or dirt contamination.
Detach the rear brake flexible hose.
1. Disconnect the brake pipe union.
2. Remove the clip.
8. Set the suspension to design height.
3-door