Focus ZTS L4-2.0L DOHC VIN 3 (2001)
Fluid Line/Hose: Service and Repair
Transmission Fluid Cooler Tubes
Removal
1. WARNING: Whenever releasing the transaxle cooling system fluid, prevent of fluid scalding. Failure to follow these instructions may
result in personal injury.
CAUTION: Whenever the fluid cooler tubes are disconnected the ports should be plugged to prevent dirt from entering.
Raise and support the vehicle.
2.NOTE: Mark the position of the feed and return hose.
NOTE: Collect escaping fluid in a drain pan.
Disconnect the feed and return hose from the transmission fluid cooler.
3. Remove the feed and return hose from the automatic transaxle.
Installation
1. NOTE: Position marks.
Connect the feed and return hose.
