Focus ZTS L4-2.0L DOHC VIN 3 (2001)
5. Remove and lower the heat shield.
^
Unclip the selector lever cable.
6. Disconnect the selector lever cable from the selector lever assembly.
1. Open the adjuster assembly by turning the selector lever cable outer sleeve.
2. Disconnect the selector lever cable from the TR sensor bracket.
3. Remove the selector lever cable from the bracket.
7. Lower the vehicle.
8. Remove the floor console.
9. Remove the selector lever cable from the selector.
1. Shift the selector lever to "P".
2. Unclip the selector lever cable.
3. Unclip the selector lever cable outer sleeve.
10. Remove the footwell heater channel.
