Focus ZTS L4-2.0L DOHC VIN 3 (2001)
11. Remove the center console front cover (left-hand side shown).
^
Remove the screws.
^
Unclip the front cover.
12. Remove the heater housing cover (right-hand side shown).
^
Unclip the four clips.
^
Remove the two screws.
13. Open the floor carpet and the insulator material and position it to one side (heat exchanger removed shown).
14. NOTE: Before pulling through the selector lever cable, tie a wire to the selector lever cable transaxle end.
Remove the selector lever cable grommet.
Installation