Focus ZTS L4-2.0L DOHC VIN 3 (2001)
1. NOTE: Tie the selector lever cable to the pulled in wire and pull the selector lever cable in position.
Install the selector lever cable grommet.
2. Secure the insulator material and the floor carpet with adhesive strap (head exchanger removed shown).
3. Install the heater housing cover (right-hand side shown).
^
Locate the four clips.
^
Install the two screws.
4. Install the center console front cover (left-hand side shown).
^
Clip in the front cover.
^
Install the screws.
