Focus ZTS L4-2.0L DOHC VIN 3 (2001)
Shifter A/T: Service and Repair
Lever
Removal and Installation
Selector Lever
Removal
1. Remove the floor console.
2. Remove the selector lever cable from the selector.
1. Shift the selector lever to "P".
2. Unclip the selector lever cable.
3. Unclip the selector lever cable outer sleeve.
3. Disconnect the selector lever assembly electrical connector.
4. Remove the selector lever assembly.
^
Remove the four nuts.
Installation
1. NOTE: Use thread locking compound for the nuts.
