ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 5421 > < Initial Inspection and Diagnostic Overview|Page 5419
Page 3
background image

All Vehicles

9. Remove the transmission fluid cooler from the two right-hand and the one left-hand bracket (left-hand side shown).

Installation
1. General note

^

Only use new self-locking nuts.

2. Install the transmission fluid cooler to two right- hand and the one left-hand brackets.

Vehicles with air conditioning
3. Install the air conditioning condenser.

All Vehicles
4. Install the radiator bracket.

^

Clip the air conditioning compressor clutch cable.

Initial Inspection and Diagnostic Overview|Page 5421 > < Initial Inspection and Diagnostic Overview|Page 5419