Focus ZTS L4-20L Clutch Disc Specifications - Page 5465
Clutch Disc: Service and Repair
Clutch Disc and Pressure Plate
Special Tools
Removal
1. Remove the transaxle.
2. CAUTION: If reusing the clutch pressure plate, loosen the bolts evenly in stages, working diagonally, until the diaphragm spring is
decompressed (approximately two turns).
Remove the clutch from the flywheel.
^
Remove the bolts and lift off the clutch pressure plate and clutch friction disc from the dowel pins.
Installation
1. CAUTION: Evenly tighten the bolts in stages, working diagonally, until the clutch pressure plate contacts the flywheel.
