ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

M/T - Hard to Shift Gears|Page 5719 > < M/T - Hard to Shift Gears|Page 5717
Page 2
background image

5. Loosen the heat shield and push it backwards.

^

Unclip the shift and selector cables from the floor pan.

6. Lower the vehicle.

7. Remove the gearshift lever cover.

1. Unclip the cover or boot.
2. Twist off the gearshift lever knob. Take out the damping sleeves and compression spring.

^

Separate the connectors (number and configuration depend on equipment).

8. Remove the floor console.

9. Remove the rear footwell heating duct.

M/T - Hard to Shift Gears|Page 5719 > < M/T - Hard to Shift Gears|Page 5717