Focus ZTS L4-2.0L DOHC VIN 3 (2001)
5. From inside the vehicle cut the PU adhesive at the given maximum depths. Use the recommended blades, following the proprietary tool
manufacturers instructions.
1. 20 mm.
2. 60 mm.
3. 75 mm.
4. 90 mm.
WARNING: WEAR GLOVES AND EYE PROTECTION WHEN WORKING WITH THE GLASS CUTTING TOOL AS THE
CUTTING OPERATION MAY PRODUCE SPLINTERS. WHEN USING THE CUTTER WEAR EAR PROTECTORS. FAILURE TO
FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
CAUTION: Make sure the cutting blades are changed where the cutting depth changes to avoid damage to the body and trim panels.
NOTE:
^
Some resistance may be encountered when cutting through the glass locating pegs in the bottom corners of the glass.
^
Carefully remove the remaining part of the locating pegs from the window opening flange.
6. With the aid of another technician, use suction cups to remove the rear quarter window glass.
INSTALLATION
1. Remove the excess PU adhesive from the opening flange.
^
Carefully trim the remaining PU adhesive from the rear quarter window opening to leave approximately 1 mm of trimmed PU adhesive
adhered to the opening flange.
CAUTION:
^
During the curing period of the PU adhesive, the door windows must be left open to avoid a build up of pressure when the doors are opened
and closed.