Focus ZTS L4-2.0L DOHC VIN 3 (2001)
Wiper Motor: Service and Repair
Windshield Wiper Motor
REMOVAL
CAUTION: Disconnect the battery ground cable.
1. Remove the air cowl grille.
NOTE: Ensure that the wiper motor is in park position.
2. Remove the wiper motor and linkage.
^
Detach the wiper motor protective cap.
^
Disconnect the wiper motor electrical connector.
^
Remove three bolts.
3. Mark the position of the lever in relation to the assembly plate.
4. Remove the wiper motor from the mounting plate and lever.
1. Remove the nut.
2. Remove the bolts.
INSTALLATION
1. Install the components in the reverse order.
NOTE:
^
Ensure that the wiper motor is in park position.
^
When installing the wiper linkage, fit the guide pins before fitting the bolts.
^
Ensure that the wiper blades do not touch the air cowl grille or the moulding.
