ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Antitheft and Alarm Systems > < Seat Sensor/Switch|Description and Operation
Page 1
background image

Antenna Cable: Service and Repair

REMOVAL

1. Remove the antenna base.
2. Remove the A - pillar trim panel.
3. Remove the sun visors.
4. Remove the overhead console.
5. Carefully detach the front edge of the headliner to allow access to the antenna cable.

6. Detach the antenna cable from the clips (headliner removed for clarity).
7. Remove the audio unit.

8. Detach the antenna cable from the clip near the heater core housing.

9. Detach the antenna cable from the clip near the heater core housing.

10. Remove the antenna cable.

INSTALLATION

1. To install, reverse the removal procedure.

Antitheft and Alarm Systems > < Seat Sensor/Switch|Description and Operation