Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
Seat Cushion: Service and Repair
Removal And Installation
REMOVAL
1. Remove the front seat.
2. Detach the safety belt buckle sensor wiring harness and the safety belt buckle pretensioner wiring harness (if equipped) from the underside of the
cushion.
^
Detach the retaining clips.
CAUTION: Note the position and routing of the wiring harness(es) to aid installation. An incorrectly routed wiring harness may lead to the wires
becoming damaged on the seat mechanism.
3. Remove the front seat cushion.
INSTALLATION
1. To install, reverse the removal procedure.