Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
Timing Belt: Service and Repair
Duratec
IN-VEHICLE REPAIR
NOTE:Ford does not provide camshaft gear timing marks, or information to perform timing belt service without the special tools shown
in this procedure.
Special Tools
Timing Belt
Name Specification
Never Seeze WSD-M13P8-A1
Silicone grease A960-M1C171-AA
Removal
1. General Instructions.
^
The positions of the engine mounting and the engine roll restrictor are described looking from the transmission towards the engine.
^
If necessary, use Special Tool 412-108 to remove coolant and ventilation hoses.
^
Owing to special model variants, some steps do not apply to all vehicles. These are clearly marked in the text.
^
If necessary, cut the cable ties and install new cable ties on installation.
2. Remove the battery cover.
3. CAUTION: Disconnect the battery negative cable.
Raise and support the vehicle.
4. Detach the drive belt cover.
5. NOTE: Mark the drive belt running direction.
