Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
10. Detach the PAS reservoir and position it to one side.
11. CAUTION: Insert a suitable wooden block between the oil pan and the hydraulic jack.
Position the hydraulic jack with the wooden block under the oil pan and raise so that the engine front mount is free from load.
12. NOTE: Mark the position of the engine front mount.
Remove the engine front mount.
13. Detach the timing belt upper cover.
^
Leave the timing belt cover in its installed position.
14. Remove the engine front mount bracket.
^
Remove the timing belt upper cover.
15. Remove the electronic ignition (El) coil cover.