Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
Timing Belt: Service and Repair
Zetec
Timing Belt
NOTE:Ford does not provide camshaft gear timing marks, or information to perform timing belt service without the special tools shown
in this procedure.
Removal
1. General Instructions.
^
The positions of the engine mounting and the engine roll restrictor are described looking from the transmission towards the engine.
^
If necessary, use Special Tool 412-108 to remove coolant and ventilation hoses.
^
Owing to special model variants, some steps do not apply to all vehicles. These are clearly marked in the text.
^
If necessary, cut the cable tie and install new on installation.
2. CAUTION: Disconnect the battery negative cable.
Raise and support the vehicle.
3. Detach the drive belt cover
