Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
NOTE: Screw in the bolts only until it starts to take up, do not tighten them.
^
Attach the coolant pump pulley.
2. Install the drive belt by turning clockwise and tension it.
3. Tighten the bolts on the coolant pump pulley.
24. Attach the drive belt cover.
25. Lower the vehicle.
26. NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its
adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
Standard finishing operations:
^
Connect the battery negative cable.
^
Check fluid levels and correct if necessary.
^
Check the routing of vacuum hoses and cables and secure them with cable ties.
