Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
Vehicles with 2.01L SPI engine
9. Detach the power steering line support brackets.
10. Disconnect the power steering line from the power steering pump.
^
Allow the fluid to drain into a suitable container.
All Vehicles
11. Remove the power steering pump to steering gear pressure line.
Installation
All Vehicles
1. Using the special tool, install a new 0-ring seal onto the steering gear to power steering pump union.
1. Push the new 0-ring seal onto the special tool.
2. Locate the special tool onto the union and install the 0-ring seal.
2. CAUTION: Make sure the line is routed correctly.
Install the power steering pump to steering gear pressure line into position.
