Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
Remove the intake camshaft pulley blanking plug.
23. NOTE: Use an open ended wrench to prevent the camshaft rotating from rotating.
Loosen the camshaft pulley retaining bolts.
Installation
1. NOTE: Do not tighten the bolts. The camshaft timing pulleys must be able to turn freely on the camshafts.
Turn the camshafts to ignition position on cylinder number 1 and insert the special tool into the camshafts.
2. NOTE: Rotate the crankshaft clockwise.
Rotate the crankshaft to TDC on cylinder number 1.
