Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
Transmission Position Switch/Sensor: Service and Repair
Transmission Range (TR) Sensor (17 705 O)
Removal
1. Disconnect the Transmission Range (TR) sensor electrical connector and the selector lever cable.
2. NOTE: Failure to hold the shift lever while loosening or tightening the manual shaft lever will transmit rotational torque to the TR switch and
shift mechanism.
Remove the TR sensor (automatic transaxle removed shown).
1. Remove the manual control lever.
2. Remove the bolts.
Installation
1. NOTE: Failure to hold the shift lever while loosening or tightening the manual shaft lever will transmit rotational torque to the TR switch and
shift mechanism.
Install the TR sensor (automatic transaxle removed shown).
-
Loosely install the bolts.
-
Install the manual control lever.
