Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
Fuel Line Coupler: Service and Repair
Quick Release Coupling
Disconnection
WARNING: DO NOT CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR ANY FUEL
RELATED COMPONENTS. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND CAN IGNITE. FAILURE TO FOLLOW
THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
CAUTION: Fuel injection equipment is manufactured to very precise tolerances and fine clearances. It is therefore essential that absolute cleanliness is
observed when working with these components. Always install blanking plugs to any open orifices or lines.
NOTE: Fuel supply line connectors are white or are identified by a white band. Fuel return line connectors are red or are identified by a red band.
1. De-pressurize the fuel system.
2. Disconnect the fuel line quick release coupling.
1. Press the fuel line quick release coupling locking tangs.
2. Disconnect the fuel line quick release coupling.
3. Disconnect the fuel line quick release coupling.
1. Pull the fuel line quick release coupling locking tang.
2. Push the clip through the fuel line quick release coupling to release the fuel line.
4. Disconnect the fuel line quick release coupling.
1. Press the fuel line quick release coupling locking tangs.
2. Disconnect the fuel line quick release coupling.
Connect
WARNING: DO NOT CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR ANY FUEL
