Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
INSTALLATION
CAUTION: Make sure that the red fuel line clip is not damaged and that it clicks into place when installing the fuel line. To make sure that the fuel line
is fully seated, pull on the line. The red fuel line clip should move slightly away from the module and the fuel line should not be able to be removed.
NOTE: Install a new fuel pump module seal and make sure that it is seated correctly on the fuel tank prior to tightening the locking ring.
1. To install, reverse the removal procedure.
2. Carry out an evaporative emission system leak test. See: Emission Control Systems/Evaporative Emissions System/Testing and
Inspection/Component Tests and General Diagnostics/Evaporative Emission System Leak Test
