Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
b.
Unscrew the worm drive clamps (W525939-S300) completely and open them up very carefully into a C shape. Place the new clamps around
the boots in the same place as the hooking clips (Figure 1).
c.
Torque the clamps to 35 +/- 4 Lb-in. (4 +/- 0.5 N.m).
d.
Reinstall fuel rail with injectors as described in Workshop Manual Section 303-04C - Fuel Injection Supply Manifold.
e.
Visual check that the boots are seated to both sides of the intake manifolds properly, and that the PCV hose and all vacuum hoses are
connected.
f.
Pressurize fuel rail with key on to ensure there are no fuel leaks. Continue on to Step 3.
3.
Using WDS with the latest software version reprogram the PCM. Verify that the PCM Part Number updates to 2S4Z-12A650-AFF after the
reprogram is complete.
