Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
Repairs and Inspections Required After a Collision: Service and Repair
Inspection and Repair After A Supplemental Restraint System (SRS) Deployment
SUPPLEMENTAL RESTRAINT SYSTEM
Air Bag Control Module
A new air bag control module must be installed following a collision in which the safety belt pretensioners or air bag(s) are deployed.
Front Two Stage Air Bag Modules
A new driver air bag module and wiring harness with the air bag module electrical connectors must be installed following deployment.
A new instrument panel, front passenger air bag module and wiring harness with the air bag module electrical connectors must be installed following
deployment.
Side Air Bag Modules
A new seat must be installed following a side air bag deployment.
Front passenger Safety Belt Buckle and Pretensioner
A new front passenger safety belt buckle and pretensioner must be installed following deployment.
Driver Safety Belt Retractor and Pretensioner
A new driver safety belt retractor and pretensioner must be installed following deployment.
Crash Sensor
Install new components following a frontal impact:
-
if the safety belt pretensioners and front air bag(s) do not deploy, install a new radiator grille opening panel if it is damaged.
-
if either the safety belt pretensioners or front air bag(s) deploy, a new crash sensor and a new radiator grille opening panel must be installed.
Side Impact Sensor
A new side impact sensor must be installed following a side impact in which a side air bag deploys.