Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
5. Tighten the tie-rod end locknuts.
6. Install the steering gear boot outer clamps.
7. Check the toe setting.
Rear
Rear Toe Adjustment
Adjustment
1. NOTE: This operation should be carried out on a flat surface and in accordance with the manufacturers instructions for the particular wheel
alignment equipment used.
Examine all suspension components for signs of damage or wear.
2. Check and, if necessary, adjust the tire pressures to specification.
3. Make sure the vehicle is at curb weight and that the spare wheel, jack and vehicle tools are stowed in their designated positions. Additional items
should be removed from the vehicle.
4. Bounce the vehicle to make sure that the suspension is in its normal resting position.
5. Using suitable Four-wheel alignment equipment, check the toe setting.
6. Raise and support the vehicle.
7. Set the suspension to the design height.
8. Loosen the nut.
