Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
Control Arm: Service and Repair
Rear Suspension
Front Lower Arm
Front Lower Arm
Removal
1. Set the suspension to the design height.
2. CAUTION: The front lower arm is marked FRONT. Make a note of the position of the front lower arm to aid installation.
Remove the front lower arm.
Installation
All vehicles
NOTE: Final tightening of the rear suspension components should be carried out at the design height setting.
1. Install the front lower arm.
Wagon
2. Detach the rear lower arm from the wheel knuckle.
All vehicles
3. Lower the suspension from the design height setting.
