Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
8.
CAUTION: The wheel hub retaining nut can be reused four times, mark the retaining nut.
Remove the wheel hub retaining nut.
9.
NOTE: Make sure that the halfshaft does not disengage from the inner constant velocity joint.
Using a suitable puller, separate the wheel hub from the halfshaft.
10. Remove the wheel knuckle bolt.
11. Remove the wheel knuckle.
1. Using a suitable lever, release the knuckle.
2. Remove the wheel knuckle.
^
Support the halfshaft out of the way.