Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
Vehicles with anti-lock brakes
4. CAUTION: Avoid any impact on the wheel speed sensor ring.
CAUTION: Make sure the wheel speed sensor ring is clean.
CAUTION: Avoid any contact between the wheel speed sensor ring and a magnetic surface.
Using the special tool install a new wheel speed sensor ring.
All vehicles
5. NOTE: The following step is only required for vehicles without a water seal installed.
Using suitable emery cloth remove any pitting or corrosion from the leading edge of the wheel spindle seal running surface.
6. NOTE: The following step is only required for vehicles without a water seal installed.
Attach the water seal and protective cap to the wheel spindle.
7. NOTE: The following step is only required for vehicles without a water seal installed.
Install the water seal in two stages.
^
Stage 1: Using the special tool engage the water seal and protective cap.
^
Stage 2: Tighten to 7 Nm.