Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
11. Remove the footwell heater channel.
12. Remove the center console lower trim panels (left-hand side shown). Remove the screws. Release the clip.
13. Remove the heater housing cover (right-hand side shown).
-
Unclip the four clips.
-
Remove the two screws.
14. Detach the floor covering and the insulator material and position it to one side (heat exchanger shown removed).
15. Attach a suitable length of draw cord to the transaxle end of the selector lever cable and secure it to the transaxle.