Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
6. Install the center console lower trim panels (left-hand side shown). Install the clip. Install the screws.
7. Install the footwell heater channel.
8. Install the selector cable to the selector lever.
1. Shift the selector lever to "P".
2. Clip in the selector lever cable outer sleeve.
3. Clip in the selector lever cable.
9. Install the floor console.
10. Raise and support the vehicle.
11. Remove the draw cord.
12. Connect the selector lever cable to the selector lever assembly.
1. Position the selector lever cable.
2. Connect the selector lever cable to the transmission range (TR) sensor bracket. Shift the selector lever to"D".
3. Secure the adjuster assembly by turning the selector lever cable outer sleeve.
