Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
7. Install the rear window glass weatherstrip.
8. With the aid of another technician, use glazing suction cups to install the rear window glass.
^
Press firmly and evenly into position.
9. Using suitable tape, secure the rear window glass in the correct position until the PU adhesive has cured.
CAUTION: During the curing period of the PU adhesive, the door windows must be left open to avoid a build up of pressure when the doors are
opened and closed.
10. If the ambient temperature falls below 10°C, use a hot air gun and apply warm air (25°C) continuously for 15 minutes (inside or outside the
vehicle).
11. Connect the high mounted stoplamp electrical connector.
12. Install the high mounted stoplamp.
