Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
10. Align the regulator clamp with the access hole (power window shown).
11. Detach the window glass from the regulator.
1. Push out the pin.
2. Push out the sleeve.
3. Remove the glass from the regulator clamp.
12. Support the glass, lower the glass and regulator to the lowest position.
13. Position the lower part of the door glass top run outside the door.
14. Remove the window glass.
NOTE: To aid removal of the door glass, stand on the inner side of the door. Make sure the glass is removed from the inside of the door.
INSTALLATION