Focus ZX5 L4-2.0L DOHC VIN 3 (2002)
2. Disconnect the hoses.
3. Lift out the pump.
Vehicles with headlamp washer system
6. Remove the headlamp washer pump and rubber seal.
1. Disconnect the electrical connector.
2. Disconnect the hoses.
3. Lift out the pump.
INSTALLATION
1. Press an additional cap onto the rear vent tube of the reservoir.
1. Front ventilation tube
2. Rear ventilation tube
3. Additional cap
NOTE: Procedure if there is a concern over washer system water coming from the filled windscreen washer reservoir when the vehicle
accelerates or decelerates strongly.
2. To install, reverse the removal procedure.
NOTE: When installing the reservoir, the filler neck must be inserted using Vaseline.
