Freestar V6-4.2L VIN 2 (2004)
Keyless Entry Key-Pad: Service and Repair
General Procedures
KEYLESS ENTRY KEYPAD CODE PROGRAMMING
1. Enter the permanent factory keyless entry keypad code.
2. Press the 1/2 button within 5 seconds to activate the programming mode. Holding the 1/2 button for more than 2 seconds after activation will
erase the stored customer code. The door locks lock, then unlock, confirming the code is erased.
3. Within 5 seconds, enter the new 5-digit keyless entry keypad code. The door locks lock and unlock to confirm the new code is programmed.
