Freestar V6-4.2L VIN 2 (2004)
1. Release the recliner handle cover tab and remove the handle.
2. Remove the side shield screw from behind the recliner handle.
Item 10: Seat Side Air Bag Connector Disassembly Note
1. Disconnect and detach the seat side air bag connector and route through the seat cushion frame for backrest removal, noting the route for
installation.
2. Detach and disconnect the backrest TED electrical connector and disconnect the backrest climate controlled seat duct from the climate controlled
blower for backrest removal.
3. If equipped, disconnect the three memory seat motor position sensors electrical connectors and release any pin-type retainers attached to the seat
cushion pan.
4. NOTE: Disconnect and release any remaining electrical connectors and pin-type retainers attached to the seat cushion and pan assembly.
Disconnect the two heated seat cushion element electrical connectors from the backrest heated seat element.
Item 17: Seat Track-to-Cushion Seat Pan Bolts Disassembly Note
1. NOTE: Disconnect and release any remaining electrical connectors and pin-type retainers necessary to separate the seat cushion pan from the seat
track and riser.
Remove the seat cushion pan bolts and remove the seat cushion assembly.
Item 18: Seat Cushion Trim Cover Disassembly Note
1. Release the J-clips.
2. Remove all the seat cushion hog rings (two shown) and remove the seat cushion trim cover.