Freestar V6-4.2L VIN 2 (2004)
1. Remove the screws and pin-type retainers, and remove the latch covers (one shown).
2. Release the J-clips.
3. CAUTION: Use care when separating the seat upholstery from the hook and loop strip, or the hook and loop strip can be torn from the
seat backrest foam pad.
Separate the hook-and-loop fasteners.
4. Remove and discard all the hog rings and remove the cushion trim cover.
Item 16: Cushion Latch Cables Disassembly Note
1. Release the cables and route handle through seat pan.
2. Release the cable from seat pan clips (one shown).
