Freestar V6-4.2L VIN 2 (2004)
1. NOTE: If the oil pan is not installed within four minutes, remove the sealer and reapply.
Clean and apply sealant to the oil pan sealing areas shown and install the oil pan rear seal.
1. Apply silicone gasket and sealer to the rear main bearing cap.
2. Install the rear oil pan seal.
3. Apply a bead of silicone gasket and sealer to the oil pan mating surface.
Oil Pan Torque Sequence
2. Install the oil pan and start the bolts.
-
Tighten the oil pan bolts in the order shown.
