Freestar V6-4.2L VIN 2 (2004)
Item 22: Upper Intake Manifold Removal Note
1. Disconnect the four engine harness pin type retainers.
2. Disconnect the two engine harness pin type retainers.
Item 21: Upper Intake Manifold Bolt Installation Note
Upper Intake Manifold Torque Sequence
1. Tighten the upper intake manifold bolts in two stages in the sequence shown.
-
Tighten the bolts to 6 Nm (53 inch lbs.).
-
Tighten the bolts to 10 Nm (89 inch lbs.).
Item 17: Spark Plug Wire Installation Note
1. CAUTION: Make sure the spark plug boots are positioned so the spark plug wires do not contact the exhaust manifold.
Apply dielectric grease to the inside of the spark plug wire boots before attaching to the spark plugs and ignition coil.
