ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Engine, Cooling and Exhaust > < Vehicle Lifting|Description and Operation
Page 2
background image

CAUTION:  To prevent possible damage to the underbody, do not drive the vehicle onto the drive-on hoist without first checking for possible
interference.

Check for interference between the upright flanges of the hoist rails and the underbody.

If an interference exists, modify the hoist flanges or build up the approach ramps as necessary to provide clearance.

Lifting Points-Frame Contact Lift, Single-Post Lift, Two-Post Lift

Lifting Point - Frame Contact Lift, Single-Post Lift, Two-Post Lift

CAUTION:
-

Under no circumstances should the vehicle be lifted by the front control arms, front I-braces or rear control arms. Severe damage to the
vehicle could result.

-

Do not position the lift pads under the No. 3 crossmember.

NOTE:  Adapters maybe necessary to clear vehicle components to lift the vehicle safely. The adapters must be placed at the four designated contact
points. Position the adapters so they are centered on the adapter contact area.

Lift the vehicle at the applicable lift points.

Engine, Cooling and Exhaust > < Vehicle Lifting|Description and Operation