ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Diagnostic Trouble Code Descriptions|Page 4457 > < Diagnostic Trouble Code Descriptions|Page 4455
Page 19
background image

than 5 ohms. If the resistance is more than 5 ohms, there is an open in SCP network circuits, damage to the DLC C251, damage to the ABS module
C155, or a problem in the in-line connectors.

Possible Causes

-

SCP circuits 914 (TN/OG) and 915 (PK/LB), shorted to ground or open

-

DLC C251

-

ABS Module

Test G

PINPOINT TEST G: THE DUAL AUTOMATIC TEMPERATURE CONTROL (DATC) MODULE DOES NOT RESPOND TO THE
DIAGNOSTIC TOOL

Test G1-G2

Normal Operation

The DATC module communicates with the diagnostic tool through the SCP communications network circuits 914 (TN/OG) and 915 (PK/LB). If one
of the bus wires becomes shorted to ground or voltage, or if some but not all termination resistors are lost, communications can continue at a degraded

Diagnostic Trouble Code Descriptions|Page 4457 > < Diagnostic Trouble Code Descriptions|Page 4455