Freestar V6-4.2L VIN 2 (2004)
4. Remove the parts in the order indicated in the illustrations and tables.
To remove individual parts, only carry out the listed steps.
Item 6: Evaporative Emission Canister Cover Removal Note
1. Remove the pin-type retainers and evaporative emission canister cover.
INSTALLATION
1. To install, reverse the removal procedure.
2. Carry out a leak test. See: Testing and Inspection/Component Tests and General Diagnostics/Evaporative Emission System Leak Test
3. Carry out the evaporative emission repair verification drive cycle. See: Testing and Inspection/Component Tests and General
