Freestar V6-4.2L VIN 2 (2004)
3. If removing the ignition coil, remove the wiper motor and pivot assembly.
4. Remove the parts in the order listed in the illustration and table.
To remove individual parts, only carry out the listed steps.
Item 2: Spark Plug Wire-to-Ignition Coil Removal Note
1. CAUTION: It is important to twist the spark plug wire boots while pulling upward to avoid possible damage to the spark plug wires.
NOTE: Spark plug wires must be connected to the correct ignition coil terminal.
Disconnect the six spark plug wires.
