Freestar V6-4.2L VIN 2 (2004)
25. Remove the restraint system diagnostic tool from the clockspring electrical connector at the top of the steering column.
26. Through the steering wheel access door opening, connect the driver air bag module electrical connector and attach it to the retainer.
27. Close the steering wheel access door.
28. Connect the battery.
29. WARNING: Restraint system diagnostic tools are for service only. Tools must be removed prior to operating the vehicle over the road.
Failure to remove restraint system diagnostic tools could result in injury and possible violation of vehicle safety standards.
With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS). See: Prove Out Procedure
Vehicles with safety canopies and seat side air bags
30. Check the active restraint system for correct operation.
